Electrical Panels
Panel upgrades and replacements for homes that have outgrown their breaker box, with the price in writing before any work begins.
- Local since 1985
- Answered day or night
- Upfront pricing
Electrical Panel Upgrades in Loganville, GA
Electrical panel services cover upgrading, replacing, and repairing the breaker box that safely distributes power to every circuit in your home. Keep Smiling Plumbing, Electric, Heating and Cooling has served Loganville since 1985, and panel upgrades are one of the most important electrical services we provide for safety and capacity. Our licensed electricians evaluate your current panel, recommend the right solution, and give you upfront pricing in writing before any work begins.
Book ServiceWhat Is an Electrical Panel?
Your electrical panel, also called a breaker box or service panel, is the hub of your home’s electrical system. Power from the utility enters through the meter and flows into the panel, where it’s divided into individual circuits that feed your outlets, lights, and appliances. Each circuit is protected by a breaker that shuts off power if the circuit overloads or shorts, which helps prevent fires and damage. Panels are rated by amperage, which is the total amount of power they can safely deliver. Many older homes have 100-amp panels, while most modern homes need 200 amps to support today’s appliances, electronics, and EVs.
Signs You Need an Electrical Panel Upgrade
- Breakers that trip often, especially when several appliances run at once
- Lights that dim or flicker when large appliances turn on
- A panel that’s warm to the touch, buzzing, or showing scorch marks or rust
- A fuse box or a panel rated at 100 amps or less
- A Federal Pacific, Zinsco, or other outdated panel brand
- No open breaker spaces for new circuits
- Plans to add an EV charger, hot tub, generator, or major appliance
Current offerUp to $1,000 offany Daikin Fit heating and cooling system
Time for a new system? Ask about financing.
Complete heating and cooling systems with financing through our trusted partners — approval takes minutes, and the payment is one you can actually plan around.
View Options
Electrical Panel Services We Provide
From a single breaker replacement to a full service upgrade, our electricians handle every part of your panel:
- Electrical panel upgrades from 100 amps to 200 amps or more
- Replacement of Federal Pacific, Zinsco, and other outdated panels
- Fuse box to breaker panel conversions
- Subpanel installation for garages, workshops, basements, and additions
- Circuit breaker repair and replacement
- Whole-home surge protector and generator transfer switch installation
Benefits of Upgrading Your Electrical Panel
An undersized or outdated panel affects your whole home. You might be resetting breakers every time the microwave and space heater run together, or putting off a kitchen remodel or EV charger because you’re not sure the system can handle it. A panel upgrade clears the way. Your home gets the capacity to power everything you use today and whatever you add down the road, along with modern breakers built to protect your family:
- Fewer tripped breakers and steadier power to lights and appliances
- Room for new circuits, remodels, additions, and major appliances
- The capacity to support EV chargers, hot tubs, generators, and heat pumps
- Modern breakers that reliably trip when they should, lowering fire risk
- Space for GFCI and AFCI protection required by current code
- Higher home value and fewer red flags during home inspections and insurance reviews
How to Choose the Right Panel Size
The right panel depends on how your home uses power today and what you plan to add in the future. Here’s a general guide:
- 100 amps: may work for smaller homes with gas appliances, but leaves little room to grow
- 150 amps: a middle option for moderate electrical demand
- 200 amps: the standard for most modern homes, with room for central air, electric appliances, and an EV charger
- 400 amps: for large homes with high demand, such as multiple HVAC systems, pools, or several EV chargers
- Subpanels: add circuits in a garage, workshop, or addition without replacing the main panel
We perform a load calculation to determine how much capacity your home needs, so you don’t pay for more than you’ll use or end up with too little.
Panels That Should Be Replaced
Some panels have known safety problems and should be replaced rather than repaired:
- Federal Pacific Electric (FPE) Stab-Lok panels, which have a history of breakers that may fail to trip
- Zinsco and Sylvania-Zinsco panels, which can have breakers that overheat or fuse to the bus bar
- Older fuse boxes that weren’t designed for modern electrical loads
- Split-bus panels without a single main breaker for shutting off power
- Panels with heavy rust, water damage, or scorch marks
Should You Repair or Replace Your Electrical Panel?
If your panel is a reliable brand, in good condition, and has enough capacity, a repair like replacing a faulty breaker or tightening loose connections is usually enough. Replacement is the better choice when the panel is 25 to 40 years old, it’s a brand with known safety concerns, it shows signs of overheating or corrosion, or it no longer has the capacity your home needs.
If you’re planning a remodel, an EV charger, or a generator, it often makes sense to upgrade the panel first. Adding new load to a panel that’s already near its limit leads to nuisance trips and potential hazards. We’ll evaluate your panel and give you pricing for both options so you can decide with the full picture.
Common Electrical Panel Problems in Loganville Homes
Many Loganville homes were built with panels sized for a lighter electrical load than families use today. Summer thunderstorms add their own stress, with lightning and power surges that can damage breakers and connections. Panels in garages and exterior walls also face humidity that can lead to corrosion. Here’s what we see most often:
- 100-amp panels in older homes that can’t support modern appliances and electronics
- Federal Pacific and Zinsco panels still in service
- Full panels with no space for new circuits
- Breakers and bus bars damaged by storm-related surges
- Corrosion from humidity in garage and exterior panels
- Double-tapped breakers and DIY wiring changes inside the panel
Our Electrical Panel Upgrade Process
- Schedule a panel evaluation online or by phone.
- Your electrician inspects your current panel, wiring, and electrical service and performs a load calculation.
- We recommend the right panel size and type and give you written, upfront pricing.
- Once you approve, we pull permits and coordinate with the utility for any required power shutoff.
- We install the new panel, transfer and label each circuit, and add any required protection devices.
- We restore power, test every circuit, schedule the final inspection, and walk you through your new panel.
Electrical Panel Upgrades Across Loganville Neighborhoods
If you’ve ever had to choose between running the dryer and the space heater, it might be time for a panel upgrade. We upgrade and replace electrical panels for homeowners all over Loganville. In established neighborhoods like Independence and Brushy Fork, many homes still have original panels that are undersized or outdated. In newer communities, homeowners often upgrade to make room for EV chargers, generators, and finished basements. Here are a few of the neighborhoods we serve:
- Independence
- Brushy Fork
- Bay Creek
- Haynes Creek
- Tara Club Estates
- Windance Lake
- Keep Smiling
- Independence
- Brushy Fork
- Bay Creek
Electrical Panel Costs and Financing
Electrical panel costs depend on several factors, and you’ll always see a written price before we start:
- Panel size and amperage
- Whether the electrical service or meter base needs updating
- Number of circuits and any code updates
- Permits, inspections, and utility coordination
We offer financing through Service Finance and Chowder. Keep Smiling Club members also get 10% off repairs and an annual electrical safety inspection.
Why Choose Keep Smiling for Electrical Panels in Loganville
Keep Smiling Plumbing, Electric, Heating and Cooling has served Loganville since 1985, and our licensed electricians handle every panel upgrade under Georgia Electrical License EN217959. We manage permits, inspections, and utility coordination so you don’t have to. Every technician is background checked and drug screened, and we were named Best of Gwinnett in 2025.
Electrical Panels in Loganville FAQs
Why people keep calling Keep Smiling.
★★★★★“He was excellent. Very knowledgeable. Pleasant demeanor. He assessed the issue, got it fixed quickly.”
Rated 4.9 stars across 4,334+ Google reviews by neighbors across Northeast Atlanta. Reviews shown are representative of Keep Smiling’s Google profile.
Write a Review (opens in a new tab)Serving Northeast Atlanta, county to county.
10 counties, 54 cities, one crew that works the same way in all of them. A truck from us is a truck from us wherever you are.
- AlpharettaFulton County
- BufordGwinnett County
- DuluthGwinnett County
- DunwoodyDeKalb County
- GainesvilleHall County
- Johns CreekFulton County
- LawrencevilleGwinnett County
- LoganvilleGwinnett & Walton County
- MonroeWalton County
- Peachtree CornersGwinnett County
- SnellvilleGwinnett County
- SuwaneeGwinnett County
…and 42 more across Barrow, DeKalb, Forsyth, Fulton, Gwinnett, Hall, Jackson, Newton, Rockdale and Walton County.
Give Your Home the Power It Needs
An outdated or undersized panel can hold your home back and put your family at risk. Our licensed electricians will evaluate your panel, explain your options in plain language, and install a safe, modern system ready for whatever you plug in next. Schedule your electrical panel evaluation with Keep Smiling today.
(770) 273-9090